All Calculators & Material Estimators

Calculate cubic yards, meters, and 80-lb/60-lb bags with 10% safety buffer for driveways, patios & slabs.

Convert total cubic yards to exact 80-lb, 60-lb, and 50-lb pre-mix bags for Quikrete and Sakrete products.

Calculate continuous strip, deck pier, and trench footing volume, bags, and longitudinal rebar reinforcement.

Calculate cubic yards and bags for 6″ to 24″ round tube piers, rebar cages, and flared bell bases.

Estimate concrete volume and bags for residential stairs, porch stoops, landing platforms, and tread risers.

Interactive trade audit checklist covering subgrade compaction, formwork bracing, vapor barrier, and rebar clearance.

All-in-one gravel estimator for driveways, patios, and drainage. Computes tons, yards, compaction, and delivery cost.

Estimate tons and tri-axle dump truck loads with multi-layer sub-base and surface gravel options.

Calculate tons and cubic yards for #57 clean stone, crusher run, dense-grade aggregate, and road base.

Estimate tons and 0.5 cu ft bags for decorative pea gravel patios, fire pits, dog runs, and walkways.

Calculate coverage tons and yards for 1″–3″ landscaping river rock, dry creek beds, and borders.

Estimate tons with standard 20% compaction factor for stabilized DG walkways, patios, and xeriscapes.

Calculate trench aggregate volume with automatic 4″ perforated drainage pipe cubic deduction.

Estimate cubic yards, tons, and 40-lb bags for lawn top-dressing, grading, sod prep, and garden beds.

Calculate excavation volume, backfill compaction, and dump truck loads for site preparation and leveling.

Convert flower bed dimensions to bulk cubic yards and exact 2 cu. ft. or 3 cu. ft. bagged wood mulch.

Calculate cubic feet, bags, and Mel's Mix recipe (compost, peat moss & vermiculite) for raised planters.

Universal flooring estimator for LVP, wood, laminate, and tile. Estimates net sq ft, carton yield, underlayment & total cost.

Calculate square footage, box cartons, and pattern waste factors (straight, diagonal, herringbone) for LVP.

Calculate ceramic, porcelain, or marble tiles, boxes, thin-set mortar bags, and grout pounds needed.

Calculate 4×8 and 4×12 drywall panels, joint compound buckets, paper tape rolls, and drywall screws.

Estimate R-13, R-19, R-30, and R-38 fiberglass batts, rolls, and bags for walls, ceilings, and attics.

Calculate roofing squares (100 sq ft), 3-tab and architectural bundles, ridge cap, and pitch multipliers.

Estimate individual paver count, pallet quantities, crushed gravel base, bedding sand, and polymeric joint sand.

Determine how many gallons of paint are needed with window/door cutouts and 1 vs. 2-coat coverage.

Bidirectional material converter calibrated with density coefficients for 30+ construction aggregates.

Learn how Taandc Tools calibrates its algorithms to ASTM C33, ACI 318, and IRC structural codes.

Submit density corrections, request new trade calculators, or get in touch with our editorial board.

Our commitment to user privacy, cookie disclosures, CCPA rights, and GDPR compliance.

Calculation limitations, material tolerances, and structural engineering disclaimer notice.